The reasons for the aging of the laser of the sheet metal fiber laser cutting machine

Reading Time: 3 minutes

The laser in the sheet metal fiber laser cutting machine is a component that is prone to aging, so it is necessary to pay attention to this problem in daily use. The following editor will introduce the reasons and solutions for the laser aging of this equipment.

1. The problems inherent in the laser itself.

2. When the power drops to affect production, the laser and the external optical path should be maintained. When the maintenance is completed, the cutting capacity will be restored to the level of the factory.

3. It is necessary to regularly maintain and maintain the external optical path of the laser generator. In fact, after the laser of the laser cutting machine works for a certain period of time, the power drop is inevitable.

4. The guide rails should be cleaned frequently to remove dust and other debris to ensure the normal operation of the precision fiber laser cutting machine.

5. If the quality of compressed air (mainly oil filter, dryness, dust). There is a lot of dust and smoke at the production site, and some users put paint work near the fiber laser cutting machine, which will affect the cutting quality and cutting ability of the fiber laser cutting machine.

6. The guide rail should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated frequently. The machine can move better while moving, cut more accurately, and the quality of the cut products is also Will improve.

The use of cooling water can reduce the heat generated during the use of the fiber laser cutting machine, so that the motor of the equipment can be maintained at a normal temperature, so that the use of the fiber laser cutting machine will be more stable. It is required to replace the cooling water of the fiber laser cutting machine once every three months. Its conductivity is required to be 30us/cm<conductivity<50us/cm. If the conductivity is greater than 50us/cm, the cooling water needs to be replaced in time; if the conductivity is less than 30us/ cm, tap water can be added to the cooling water. When adding tap water, pay attention to monitoring the conductivity value to avoid the conductivity exceeding the requirement. The case of the fiber laser cutting machine adopts a closed design. Please pay attention to keep the case closed during use to prevent the high temperature and humidity from outside from entering the case.


Hello Customers

Hello Customers

I'm Jackson Cao, founder of prima-press, with over 30 years in the sheet metal industry. Our goal is to deliver valuable content related to sheet metal processing to a wider audience. Don't hesitate to get in touch—I'm delighted to offer top-tier service and products. Welcome to a world of premium sheet metal expertise!

Leave a Reply

Related Posts