Primapress brand
Professional manufacturer of CNC bending machines, CNC shearing machines, and CNC metal sheet bending rolling machines
The four roller plate bending machine is suitable for the bending and forming of metal plates. It can roll circular, curved, and conical workpieces within a certain range, and has the function of pre bending the plate ends. The remaining straight edges are small, and the work efficiency is high. The metal sheet can be roughly leveled on this machine.
Machine parameters and performance
- Can produce steel pipes with a diameter of 1-5 meters
- Steel plate base material width ≤ 3.2 meters
- Steel plate thickness ≤ 80mm
Safety operating procedures
- The metal sheet bending rolling machine must be managed by a dedicated person.
- Operators must be familiar with the structural performance and usage of the metal sheet bending rolling machine, and can only operate with the consent of the responsible management personnel.
- Before starting the machine, carefully check whether the safety devices are in good condition.
- During operation, it is strictly prohibited to place hands and feet on the rollers, transmission components, and workpieces.
- After work interruption, the clutch should be set to neutral.
- Multi person collaborative work must be commanded by a dedicated person.
- Overloading work is strictly prohibited.
- The tilting and resetting of the lifting and flipping bearings of the upper roller and the balancing of the upper roller must be carried out after the main drive is stopped.
- It is prohibited to pile up workpieces and debris in the workplace, and the machine tool and site should be kept clean at all times.
- After completing the homework, cut off the power supply and lock the power box.
