W11S-20X6000 Upper Roller Plate Rolling Machine

Categories Other Machines, Plate rolling machine

This machine is a special equipment to roll the plate into curve, cylinder, conical in the principle of three point circle. The action as below:

Top roller move by vertical. Power: hydraulic oil tank. Role: put the pressure on the plate to make the plate bending deformation.
Top roller move by horizontal. Power: electromotor. Role: adjust the horizontal distance between the top and bottom roller to make the top
and bottom roller position in asymmetrical to pre pend the sheet edge and decline the length of the flat zone.
Bottom roller rotate. Power: electromotor, Role: supply the torque for bending plate.
Opening device drop down and reset.Power: hydraulic oil tank. Role: take out the finished workpiece.

DESCRIPTION

W11S-20X6000 Upper Roller Plate Rolling Machine

※ The upper roller is designed as drum shape. Support roller install in the lower of bottom roller to help bending a perfect cylinder from thin to thick plate;

※ Special bending craft, high precision pre bending of the edge, digital control for bending process;

※ Rich shape bend such as O,U, Retc;

※ Cone bending device for conical bend easily;

※ Whole chassis, simple ground foundation, it’s convenient to move the workplace;

※ According to the role or requirement of customer, economic digital display type or TNC digital control type is optional;

※ CE certificate.

W11S-20X6000 Upper Roller Plate Rolling Machine Technical Parameters

Item	Parameter
Max. thickness of plate	20mm(CS),16mm(SS)
Max. pre-bending thickness	16mm(CS),12mm(SS)
Max. width of plate	6000mm
Length of working rolls	6100mm
Pressure of upper roller	270T
Pressure of upper roller	270T
Bottom roller diameter	270mm
Bottom roller diameter	270mm
Support roller groups	2
Min. bending diameter	1500mm
Yield limit	245MPa
Main motor	37KW
Hydraulic motor	11KW
Move motor	5.5KW
Max. pressure	19.5Mpa
Max. pressure	19.5Mpa
Dimension	9650x2250x2800mm