Taiwan quality VMC Vertical cnc milling machine 50S 60S cnc vertical machining center machine

Share on facebook
Share on twitter
Share on linkedin

Description

Taiwan quality VMC Vertical cnc milling machine 50S 60S cnc vertical machining center machine 

VMC-60S Optical and mechanical characteristics:

  1. The machine bed is made of HT300 high-grade cast iron;
  2. Germany INA line rail is adopted, and the width of X/Y/Z three-axis rail is 45/45/45mm;
  3. The X/Y/Z three-axis guide rail spans are 340/745/440mm respectively;
  4. The three shafts all use C3 high precision lead screws with a diameter of 40 and a pitch of 12. The three shafts use five FAG original bearings (3062), three at the motor end and two at the tail end, and are pre tensioned;
  5. X-axis and Z-axis adopt 6-slider mode to ensure cutting rigidity;
  6. BT40-150 high rigid main shaft is used for circular spraying;

7.The lead screw guide rail lubrication system adopts fully automatic intermittent thin oil lubrication; All oil pipes are made of pure copper;

3、 Main technical parameters

project Specifications unit VMC-60S
trip X/Y/Z axis mm 1100/600/600
Distance from spindle nose to workbench mm 120-720
Distance from spindle center to column guide rail surface mm 650
Guide rail form Linear Guide
worktable Table size mm 1200×600
Maximum load of workbench kg 800
T-groove No/mm 5-18×100
principal axis Spindle specifications mm BT40
Spindle speed rpm 8000
Spindle transmission mode Belt type
Tool magazine device Tool magazine form/tool change time (tool setting) Disc type BT40/ 1.5S
Magazine capacit tools 24
Maximum tool diameter (temporary tool) mm 78
Maximum tool diameter (no temporary tool) mm 120
Maximum tool length mm 300
Maximum tool weight kg 8
Movement rate X、Y、Z axis Rapid feed m/min 36 / 36 / 24
Cutting feed rate m/min 0.005~10
electric motor Spindle power/torque kW,Nm βiI 12/10000,11/15,52/95
X-axis servo motor kW,Nm βiS 22/3000 ,3,20
Y-axis servo motor kW,Nm βiS 22/3000 ,3,20
Z-axis servo motor kW,Nm βiS 22/3000 ,3,20
Precision (VDI German standard) Positioning accuracy (VDI full stroke) mm 0.010/0.010/0.010
Repeated positioning accuracy (VDI full stroke) mm 0.008/0.008/0.008
Power demand Power requirements kva 20
Air source requirements kg/cm 6-8
Machine tool dimensions L * W * H mm 3100×2550×2800
weight t 7

3、 Main technical parameters

project Specifications unit VMC-60S
trip X/Y/Z axis mm 1100/600/600
Distance from spindle nose to workbench mm 120-720
Distance from spindle center to column guide rail surface mm 650
Guide rail form Linear Guide
worktable Table size mm 1200×600
Maximum load of workbench kg 800
T-groove No/mm 5-18×100
principal axis Spindle specifications mm BT40
Spindle speed rpm 8000
Spindle transmission mode Belt type
Tool magazine device Tool magazine form/tool change time (tool setting) Disc type BT40/ 1.5S
Magazine capacit tools 24
Maximum tool diameter (temporary tool) mm 78
Maximum tool diameter (no temporary tool) mm 120
Maximum tool length mm 300
Maximum tool weight kg 8
Movement rate X、Y、Z axis Rapid feed m/min 36 / 36 / 24
Cutting feed rate m/min 0.005~10
electric motor Spindle power/torque kW,Nm βiI 12/10000,11/15,52/95
X-axis servo motor kW,Nm βiS 22/3000 ,3,20
Y-axis servo motor kW,Nm βiS 22/3000 ,3,20
Z-axis servo motor kW,Nm βiS 22/3000 ,3,20
Precision (VDI German standard) Positioning accuracy (VDI full stroke) mm 0.010/0.010/0.010
Repeated positioning accuracy (VDI full stroke) mm 0.008/0.008/0.008
Power demand Power requirements kva 20
Air source requirements kg/cm 6-8
Machine tool dimensions L * W * H mm 3100×2550×2800
weight t 7

If any supplier fails to supply, it will be replaced by a brand of no less than the same quality.

4、 Main accessories

Serial No name number Manufacturer Specification and model
1 system 1set Fanuc, Japan FANUC 0i-MF;10.4″Color LCD display
2 Spindle servo motor 1set Fanuc, Japan βiIP30/8000
3 X、Y、Z servo motor 1 set for each Fanuc, Japan βiS 40/2000 /βiS 40/2000 /βiS 40/2000B
4 X、Y、Z Shaft lead screw bearing 1 group for each Germany FAG / Japan NSK 50 x 100/40×90
5 X-axis ball screw 1 group for each Japan THK / Taiwan     HIWIN / PMI GQ63×12-C3
6 Y-axis ball screw 1 group for each Japan THK / Taiwan      HIWIN / PMI GQ50×10-C3
7 Z-axis ball screw 1 group for each Japan THK / Taiwan     HIWIN / PMI GQ50×10-C3
8 X-axis linear guide rail 2strip Germany INA/ TaiwanHIWIN/PMI 55(8slider)
9 Y-axis linear guide rail 2strip Germany INA/ TaiwanHIWIN/PMI 55
10 Z-axis linear guide rail 2strip self-control quench
11 Tool magazine 1 set Okada 24 disc type
12 Automatic lubrication system 1 set Proton 4L
13 Main pneumatic components 1 set gold plate
14 Main electric components 1 set Schneider
15 Main drive toothed belt 1group JapanUNITTA
16 air conditioner 1set Commissure width

     

Our Services

Competitive Pricing

Due to our batch manufacturing, we will have a lower price with best quality machines.

Technical Support

When a breakdown occurs, our technicals are on call for both online & onsite correction.

Strict Quality Control

All machines are inspected by our quality control department before shipped out.

Spare Part Kits

Critical components & worn spare parts are offered to avoid unplanned stops.

Expert Solutions

We will provide you professional expert suggestions for your required machine.

Fast Delivery

All of the machine ordered by our customer will be delivered within 30 days.

Request Free Quote

Send us email or fill in below contact form. We will reply your message as soon as possible.