Servo Electric Press Brake

Features of Primapress Servo Electric Press Brake

1. Output according to the actual tonnage, saving energy and electricity.
2. Pure electric does not need oil, environmental protection and cost saving, low noise, suitable for enterprises with high requirements in processing environment.
3. The efficiency is increased by 100%, the speed is fast, and the output is increased.
4. High precision, the repeatability of the fully closed-loop control slider is 0.01mm, and the repeatability of the reargear is 0.05mm.The actual tonnage output makes the machine more durable and does not damage the knife mold.
5. The software and hardware of the servo motor have good compatibility, the system is stable, and the machine does not stop all day.
6. All-steel welded structure, manganese steel material has a good rebound coefficient, and the stress is relieved by vibration demagnetization, tempering and sanding treatment, and the body is stable and durable.
7. Direct manufacturer, one-stop service, to solve customer’s knife mold design, product, automation and other problems, the whole machine is guaranteed for three years.

Specification

Main Configuration List

Finite Element Analysis For High Rigidity Design

The key mechanical parts of the machine tool use finite element analysis to analyze the deformation and safety factor to ensure the high rigidity requirements of the machine tool as a whole and the reliability of long-term use.

Energy Saving And Environmental Protection

The CNC system ET 15 is mainly used in all-electric servo CNC bending machines, especially power saving and green environmental protection.
Special power saving: the difference in electricity consumption between the all-electric servo bending machine and the electro-hydraulic servo bending machine is like the difference between the inverter air conditioner and the ordinary air conditioner.
No need to use and replace hydraulic oil, which ends the pollution of waste hydraulic oil to the environment.

Spindle Power Box

The spindle power box can transmit the bending pressure, adopts heavy-duty ball screws and bearings, ultra-long life design, and seal protection design ensures that key components are not affected by external dust.

Back Gauge

The standard configuration is dual-axis (X, R) CNC floor-mounted rear gauge, and two-axis (X, R), four-axis (X, R, Z1, Z2), six-axis (X1, X2) can be selected according to different needs of customers , R1, R2, Z1, Z2, )

Main Technical Indicators And Functions

1. Y1/Y2 adopts grating scale or magnetic scale feedback full-closed loop control mode, precise positioning control, repeated positioningIntelligent tool load monitoring ensures tool safety
2. Accuracy reaches ±3μm!
3. Five-wire touch screen, high reliability and service life of more than 10 million times, the operation process is simple and fast;
4. Bending pressure automatic calculation function, alarm prompt when the pressure exceeds the limit range;
5. “Direct” calculation function of the back gauge position: According to the relative size and plastic deformation of the sheet metal, the back gauge position is directly calculated according to the neutral layer;
6. Angle intelligent compensation function: According to sheet metal process parameters such as sheet metal material characteristics, die size, material thickness, bending angle, etc., combined with the angle calculation model of the CNC system, any sheet metal only needs one trial bending and can be automatically corrected according to the angle deviation , can be officially produced;
7. Arc continuous bending function;
8. Mold parameter library: establish a mold parameter library for customers, which is convenient for customers to quickly call parameters for sheet metal bending