How to solve the aging problem of metal laser cutting machine

Reading Time: 3 minutes

Among the parts of the metal laser cutting machine, the laser is a vulnerable part, so both the operator and the business owner must pay attention to it in daily use. So how to slow down the aging of the metal laser cutting machine? In fact, it is like this. There are roughly two reasons for the power reduction of the fiber laser cutting machine:

One, the machine needs to check and maintain the external light path of the laser generator regularly. In fact, the power of the metal laser cutting machine will decrease after a period of continuous use. When the power drops to affect production, it is necessary to maintain the laser and the external optical path. When the maintenance is completed, the cutting capacity will be restored to the level when leaving the factory.

Laser maintenance and maintenance: The laser is the head component of the metal laser cutting machine. Its quality directly affects the overall performance of the metal laser cutting machine. If its quality itself has problems, it will accelerate the rapid aging of the metal laser cutting machine. Therefore, choosing a high-quality laser is the key point. In addition, the maintenance work in the later period is also very important. Just like a person, no matter how good the skin is, it needs to be maintained. Only by doing enough daily care and maintenance can you delay aging and make your youth longer. After the laser has been working for a period of time, the power The decline is inevitable. Therefore, doing a good job in the maintenance of the laser at ordinary times can try to keep the laser function at a standard and delay the aging problem of the laser.

Secondly, the environment and conditions of the production site have a great influence on the power of the metal laser cutting machine. Such as the quality of compressed air. There is a lot of dust and smoke at the production site, and some users put paint spraying operations near the fiber laser cutting machine, which will affect the power of the fiber laser cutting machine, and then cause the cutting quality and cutting ability to decline.

The use environment of the metal laser cutting machine: the use environment of the metal laser cutting machine (such as temperature, dust) The metal laser cutting machine has certain requirements for the temperature of the studio, too high temperature will cause crashes, slow response, and low temperature It can cause damage to the trachea and cables, and easily cause breakage and air leakage. Therefore, controlling the temperature of the working environment of the metal laser cutting machine is one of the key factors to delay the aging. In addition, the metal laser cutting machine will generate a large amount of metal dust during operation. These dust, dust and smoke in the air adhere to the equipment, which will increase the wear and tear between the various parts of the equipment, and the attached dust will also affect The transmittance of the focusing lens indirectly affects the cutting accuracy of the metal laser cutting machine.

The aging of metal laser cutting machines is an unstoppable trend. How to protect and delay aging is a key issue. We hope that users will do a good job of maintenance in their daily work. In addition, if there are any problems in the work of the equipment, it must not be ignored, and it must be dealt with in time to keep the equipment in good condition.


Hello Customers

Hello Customers

I'm Jackson Cao, founder of prima-press, with over 30 years in the sheet metal industry. Our goal is to deliver valuable content related to sheet metal processing to a wider audience. Don't hesitate to get in touch—I'm delighted to offer top-tier service and products. Welcome to a world of premium sheet metal expertise!

Leave a Reply

Related Posts